getting the inner corner

Replies to This Discussion

Permalink Reply by Danny Boyes on June 28, 2013 at 1:23pm

Basic premise of this method is that the average point of the 3 that make up the corner will be outside the boundary if it is an inner corner. Might not work for all possibilities but from what I can tell it works pretty good.

EDIT:

If you then want to go on and fillet the curve at these locations then you can use a combination of [Curve CP] and [Fillet]*

* Make sure you get the correct fillet

Permalink Reply by Dmitrii Karpovich on June 28, 2013 at 1:39pm

Thank you. I know it works :) But i can't understanding what you doing with "list item" component? It's new for me.

Permalink Reply by Danny Boyes on June 28, 2013 at 1:45pm

What version are you using because this is the New one that allows you to zoom in and add extra outputs. To do it the old way you need three Items and Wrap set to true

Also Its not as straight forward as I first thought because the Fillet component outputs multiple curves with a single filleted corner that you then have to combine afterwards

Permalink Reply by Dmitrii Karpovich on June 28, 2013 at 1:55pm

And its realy didn't works for all possibilities :(

Permalink Reply by Dmitrii Karpovich on June 28, 2013 at 1:59pm

But it's simple! I am stupid in eavning. THANK YOU!