Square Extrusion honeycomb panel

I am essentially hoping to recreate the pipe function except with a square section along a polyline I have used a script to create a honeycomb panelling along a surface as can be seen in the attached jpeg. I wish to turn each one of these panel edges into a square extrusion like the other jpeg i have attached

Im really stuck and would be really greatful for any help!

cheers

Attachments:

honeycomb.jpg, 1.3 MB
extrusion.jpg, 606 KB
three.png, 142 KB

Replies to This Discussion

Permalink Reply by Yoann Mescam (Systemiq) on March 20, 2011 at 5:31pm

Something like this ?

It doesnt work like a pipe, just 4 lofts.

Attachments:

HexExtr.ghx, 202 KB

Permalink Reply by Boris Leokumovich on November 11, 2011 at 11:21am

Hello,

Im quite new to grasshopper and came across your definition when searching for help with my work. It seems to me that something in your definition is missing when comparing to the image you have up above.

I am working on a facade system for my project with honeycomb mullions (they need to be extruded as well as have thickness) . Any help would be greatly appreciated.

Thanks in advance.

Permalink Reply by Yoann Mescam (Systemiq) on November 11, 2011 at 11:31am

Just feed the surface component (the green one in the screenshot) with a GH or Rhino surface.

Permalink Reply by Boris Leokumovich on November 11, 2011 at 11:54am

Thanks for the quick reply.

Thats exactly what i am doing but only seem to get an planar curve extrusion. Doesnt seem to give the honeycomb thickness. Below I circled the part that seems to be missing in the original definition file you provided.

Thanks.