how to convert multiple surface into one?

Replies to This Discussion

Permalink Reply by Danny Boyes on April 20, 2011 at 2:17pm

If your surfaces happen to be planar then you could make a planarSrf from the Edges of your joined BRep.

But I suspect from the image that they are not. In which case you you are going to have to create section curves and loft them. (Thinking out load here as I haven't tried this yet) 

Permalink Reply by Jim choo on April 20, 2011 at 2:30pm

it's not planar, I tried the lofting command as well, but those sharp edges were gone which I want to keep.

Permalink Reply by Danny Boyes on April 20, 2011 at 2:36pm

In which case it has to be a polysurface.

Permalink Reply by Pieter Segeren on April 20, 2011 at 2:40pm

You can keep em sharp with the loft options' T input set to 3.

btw: is there a rule for lofting curves that touch?

Permalink Reply by Danny Boyes on April 20, 2011 at 2:45pm

That's still a polysurface

Permalink Reply by Jim choo on April 20, 2011 at 3:22pm

converting the polysurface into single surface, is that possible?

 

otherwise how am i supposed to introduce the polysurface into grasshopper?

 

I'm right now using the Geometry container in Grasshopper to hold the polysurface, but when I tried to project some curves on this polysurface, it throws me error, I think it's because the 'project' requires for a BRep.

Permalink Reply by Danny Boyes on April 20, 2011 at 3:38pm

Just checking.....

Have you got the right Project Component?

Curve>Util>Project

It should have 3 inputs C,B and D and 1 output C

 

You can use any of the following Geometry Params: multiple surfaces in Surface or a polysurface in BRep or Geometry. And you can even join the separate surfaces with the BRep Join component before passing it into the Project Component.

Permalink Reply by Evert Amador on April 20, 2011 at 4:24pm

Hi,

 

What is what you want to achieve by having a single surface with this shape apart from projecting some curves? depending what you wnat to achieve there may be a different approach (just thinking).

you could use the creasespliiting command in rhino and loft 4 curves with the straight option, see attached. Yo can play with the profile curves you loft as neccesary.

 

This is integrated in V5 you will need to download it from the rhinolabs for R4,  I hope it helps.

 

Evert

Attachments:

• SIngleSurfaceFromLoft.3dm, 47 KB