The annual Daylight Simulation doesn´t start

Replies to This Discussion

Permalink Reply by Sebastien Bigot on June 21, 2017 at 11:49am

I add a new file with the internalised data.

Attachments:

• 170602_Luz_Colegio.gh, 768 KB

Permalink Reply by Abraham Yezioro on June 21, 2017 at 12:47pm

Not all the geometry was internalised. There are errors becouse of missing geometries.

-A.

Permalink Reply by Mostapha Sadeghipour Roudsari on June 21, 2017 at 6:16pm

Can't check the file now but these two steps usually helps to find why it doesn't run.

Permalink Reply by Sebastien Bigot on June 21, 2017 at 7:01pm

Mostapha

Thank you for the fast answer. Finally I internalised all geometry and I tried the two steps but I don´t find anything missing. I don't what is wrong.

Permalink Reply by Sebastien Bigot on June 21, 2017 at 7:02pm

With the file that contain everything internalized

Attachments:

• 170602_Luz_Colegio_DOESNT WORK.gh, 729 KB

Permalink Reply by Abraham Yezioro on June 21, 2017 at 8:50pm

Your zone is not closed. There are plenty of discussions how to check this.

-A.

Permalink Reply by Abraham Yezioro on June 22, 2017 at 11:02am

Can be useful to upload the file with the zone closed.

Basically you need to see where in the chain the data is not flowing as it is supposed to. Can be that the "closed brep" is solved now, but there is another issue later on.

-A.

Permalink Reply by Sebastien Bigot on June 22, 2017 at 11:33am

The problem was coming from the north.

I don't know why, I changed the north and it worked.

Thks for your quick answer Abraham.