DECONSTRUCT BREP_MISSING CORNERS

Replies to This Discussion

Permalink Reply by Brian Harms on April 25, 2017 at 12:31pm

Maybe something like this, where your input surface is on the right, and the recreated surface is on the left. It's not an exact recreation, but it's very close and may be suitable for your needs.

Permalink Reply by Brian Harms on April 25, 2017 at 12:32pm

file

Attachments:

• srf rbld.gh, 11 KB

Permalink Reply by Brian Harms on April 25, 2017 at 12:41pm

Or maybe even better, don't try to create straight edges, just try to find the kink in that messed up curve, find the closest point on the curve, then shatter it. Then you could rebuild all 4 edges with adequate control points so they are smooth but not messed up. Then you could patch, loft, whatever.

Attachments:

• srf rbld_cp.gh, 11 KB

Permalink Reply by Firat Aydin on May 9, 2017 at 12:41am

Thanks for the response gens 
The reason of the problem was the trimming geometry. 
One way or another i fixed it

cheers

• ‹ Previous
• 1
• 2
• Next ›
• Page