Different energy simulation results with same set up

Hello,

I'm having a problem with energy simulation outputs. Everytime I run simulation I get different results with same energy simulation set up. File is attached.

Is this a bug or am I doing something wrong?

Attachments:

daylight_simulation.gh, 1.4 MB

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on April 24, 2017 at 9:20am

1. Is it an energy simulation or a daylighting simulation? Filename is daylight_simulation.

2. If it is an energy simulation then there is something wrong, but if it happens in daylight simulation read this discussions: 1, 2.

Permalink Reply by Vanja Kušen on April 24, 2017 at 12:37pm

Both energy and daylight simulations are in the same file but they are separated. File name is bad, I know.

Now, back to the question. I read your reply on similar question, but for example let's look at heating results. First simulation gives me 22 kWh/m^2 on annual base and the next one 1.06 kWh/m^2 on annual base. That's just example. Each result is different for each simulation.

Permalink Reply by Mostapha Sadeghipour Roudsari on April 24, 2017 at 1:09pm

Post your discussion to ladybug forum so someone can take a look. That should not be happening. http://www.grasshopper3d.com/group/ladybug/forum

RSS