problem on rebuild curve component when switching to RH WIP / GH 1

Replies to This Discussion

Permalink Reply by Giulio Piacentino on December 1, 2016 at 9:33am

Hi Ivan

Yes, this could be a bug, or maybe also not!

Do you think you could simplify the definition and try to find a simple case that does not work? If not, maybe can you post the definition (in its simplest form, please!)

Thanks

Giulio
--
Giulio Piacentino
for Robert McNeel & Associates
giulio@mcneel.com

Permalink Reply by Ivan Hawk on December 1, 2016 at 9:33am

I made a few more test and the problem comes out after joining 2 curves togheter

the rebuild component seems to be crashing on some joined curves

Permalink Reply by Giulio Piacentino on December 1, 2016 at 9:34am

maybe can you post the definition (in its simplest form, please!)? Or post an example?

Permalink Reply by Ivan Hawk on December 1, 2016 at 10:20am

Ciao Giulio and thanks for your reply

I estrapolated the curves and pasted them on a new RH6 file ( see attachment ) ...im still having the problem

the curves are looking fine but for some reason reb.crv on GH1 is generating some null result.

thanks

Ivan

Attachments:

• 2016.12.01_curves_rebuild_problerm.3dm, 84 KB
• 2016.12.01_curves_rebuild_problerm.gh, 7 KB

Permalink Reply by Giulio Piacentino on December 5, 2016 at 9:21am

Hi Ivan

I am investigating this. In Rhino WIP I can open these files and reproduce. In Rhino 5 after converting I get the same problem (so I get the same behavior).

I will keep on looking into this and let you know.

Giulio
--
Giulio Piacentino
for Robert McNeel & Associates
giulio@mcneel.com

Attachments:

• rebuild_problem_2.gh, 14 KB

Permalink Reply by Ivan Hawk on December 5, 2016 at 11:06am

Hi Giulio and thanks for your efforts

attached you can find 2 files, they contains same curves generated by same script but saved from different version according to the file name

1. 2016.12.05_curves_RH5_gh0076
2. 2016.12.05_curves_RH6_gh1

inside each file there are 2 layers containing curves before and after joining 

please try to open the files and rebuild curves on each layer by selecting multiple curves but one layer at the time

when you'll get to file 2 layer "CRV OUT OF RHINO 6   GH1  AFTER JOINING" you'll be able to reproduce the error

it does not mind if you open the file on rh5 or rh6 ..what makes the difference is which RH version the joined curves have been generate from

thanks in advance for your help

Ivan

Attachments:

• 2016.12.05_curves_RH5_gh0076.3dm, 225 KB
• 2016.12.05_curves_RH6_gh1.3dm, 224 KB