Download the first release here!

Replies to This Discussion

Permalink Reply by Dimitry A. Demin on August 22, 2013 at 2:41am

seems to be a nice tool at the first glance!  

Does somebody tested if it works also with 0.9.0014 gh build?

Thanks 

Dimitry

Permalink Reply by Rafat Ahmed on January 5, 2014 at 2:16pm

Its Really Brilliant Plugin Thanks Andrew

Permalink Reply by Dimitrios Papadopoulos on May 3, 2014 at 7:23pm

Hello Andrew,

I try to run the plug-in but keep getting an error

1. Something went wrong with the file upload. Check your network connection.

I have admin privileges from the computer I am running GH so there nothing blocking the network.

Any suggestions?

Thanks a lot

Dimitris

Permalink Reply by Kada Liao on August 12, 2014 at 10:03pm

Hi Dimitrios,

I have the same problem. Have you figured out how to solve it?

Permalink Reply by Grasshope on November 12, 2016 at 8:51am

Dear Andrew, thanks for the amazing Sketchfab Uploader!

The example file attached here contains a mesh with about 50K faces and their respective color which is the visualization of noise exposure level simulation results imported from other software.

1. if I bake this mesh with color into Rhino, export it as obj file together with mtl material definition, upload them to Sketchfab, the process is very quick. However, the geometry will loss all the color although the mtl file is uploaded together with the obj file in one single zip file: https://skfb.ly/VXpr

2. To use your upload, i have to break this single mesh into individual mesh surfaces so that I can assign the color information to each of them as you mentioned in your demo video.However, it will take very long time to export all the 50K meshes... I have to force to terminate Rhino...

3. Neverthelss, I still manage to use your uploader to upload part of the meshes in smaller quantity and in relatively reasonable time (10K mesh, 5 minutes): https://skfb.ly/VXoT

4. So, may I ask why the mesh object with color baked into Rhino is not able to be imported into Sketchfab with the color information intact?

5. How to speed up the upload process for large amount of individual mesh surfaces?

Hope you can kindly advise!

Thank you very much!

- Ji

Attachments:

• sketchfab_export_test_v02.gh, 754 KB

Permalink Reply by Grasshope on November 12, 2016 at 9:15am

... I noticed that the color information for each mesh surface is not been written out when export the baked mesh in Rhino as obj file:

... whereas in the temp file generated using your uploader, the color information is correctly written out into the mtl file:

May I ask how do you retrieve the color information for each mesh surface and write it out in such a format?

Thanks!

Permalink Reply by Flora1.618 on January 31, 2017 at 3:45pm

Hello, when I set my Boolean toggle as true.. nothing happens. How is my model supposed to upload? What am I missing?

Attachments:

• Rotated tower new.gh, 19 KB

Permalink Reply by AJ on July 11, 2018 at 3:20am

you are my hero!!!

• ‹ Previous
• 1
• 2
• Next ›
• Page