Graph from point not working (Spiderweb)

Hi there

I found this script online, that gives the flow lines on a surface ( I'm aware that there are other C# scripts available for the same), but I would like to use the graph theory method. As I want to integrate it with other parameters such as accumulation and force etc. When I plug in my surface(which is a poly surface the component "graph from points" gives a weird error(check image). Any help would be deeply appreciated.

Best,

Mr A.

Attachments:

Topographic Analysis Spiderweb.gh, 3.5 MB

Replies to This Discussion

Permalink Reply by Aditya Tognatta on October 4, 2016 at 10:15am

finding what seems to be the problem?

Permalink Reply by Aditya Tognatta on October 5, 2016 at 2:36am

guys any luck?

Permalink Reply by Richard Schaffranek on October 5, 2016 at 4:56am

Hello,

you will need to replace all spiderweb compoents, as said when sending the link, it is done with a old version of spiderweb (3.2). All version therafter use different inputs and outputs. So if you open it with a newer version of spiderweb, some components might be replaced but are not working correctly...

oh, and please provide only one connection distance, if you probide a list you will create n graphs...

Permalink Reply by Aditya Tognatta on October 5, 2016 at 9:12am

Hey Richard,Thanks for the reply, just ran into another problem. Don't what values did the legacy component gave out, but it certainly has changed. I need the immediate neighbors as a list.

Thanks in advance.

Permalink Reply by Aditya Tognatta on October 5, 2016 at 9:16am

do i need to do that with closest point separately from grasshopper. I will upload the file just a more comprehensive study. I 'm having serious problems with it.

Thanks.

Attachments: