import CFD result to honeybee

Replies to This Discussion

Permalink Reply by architsama on April 11, 2016 at 4:16am

i want to know too

Permalink Reply by Mostapha Sadeghipour Roudsari on April 11, 2016 at 6:47am

What software are you using the run the CFD and what is the structure of the results?

Permalink Reply by Mostapha Sadeghipour Roudsari on April 11, 2016 at 7:54am

This is a quick hack that I wrote for a specific file but you might be able to edit it to work for your purpose. If you have a huge data-set you probably need to optimize the code.

Attachments:

• visualizeCFDResults.gh, 14 KB

Permalink Reply by Chris Mackey on April 11, 2016 at 8:09am

Architsama,

Attached is another example.

The data in the CSV came from OpenFOAM processed through paraView.

-Chris

Attachments:

• ParseClimate CSV.gh, 12 KB
• WindFactor_1.75m0.csv, 3.5 MB

Permalink Reply by architsama on April 11, 2016 at 10:47pm

haha, it is wonderful , it will help me let the results visualize , thank you very much .then i must find how to get the gh model to the CFD or CFX , it is hard for me to write codes . if i have time someday , i must study the codes hardly.

thank you again

Permalink Reply by Theodoros Galanos on April 17, 2016 at 5:49am

Hi Architsama,

Hopefully there will be an implementation of this soon in the HB/LB API (see Butterfly project). However, if your goal is transporting the geometrical detail in Rhino to a CFD program, then you can accomplish that with the .stl export.

Kind regards,

Theodore.

Permalink Reply by Chao jiang on April 12, 2016 at 1:41am

thank you for your responce. i finally import the velocity contours map to the ladybug with some modification of your program.