F.1.4 Definition Variation: Post your submittals here.

For the NSAD Adv. Rhino class-

It's good to see some submittals for the F.14 variation popping up on the forum ahead of the deadline. To keep things a bit more organized, please reply to this discussion with a brief description, an image of the preview geometry in the model space, and attach your definition. If you started a your own thread, you can delete it after posting here.

Thanks!

Replies to This Discussion

Permalink Reply by Daichi Saito on January 19, 2016 at 2:35pm

Hey class this is my F.1.4 grasshopper definition. Instead of one curve input I used the Merge component to draw two forms from two curve inputs.

Attachments:

F_1_4.gh, 7 KB
F14_screenshot.png, 438 KB

Permalink Reply by Jayro Lopez on January 19, 2016 at 4:28pm

Hi everyone,

This is my F.1.4 Grasshopper Definition.

Attachments:

F.1.4 Grasshopper Definition Jayro Lopez.png, 347 KB
F.1.4 Grasshopper Definition Jayro Lopez.gh, 6 KB

Permalink Reply by Felipe Rocha on January 19, 2016 at 6:58pm

Hey, this is my version of f.1.4 definition. I kept the everything pretty close to the primer and then I played around with the graph mapper.

Attachments:

gh f.1.4.PNG, 497 KB
gh f.1.4.gh, 9 KB

Permalink Reply by Barrak on January 19, 2016 at 8:30pm

Hi All

In each variation, the number of curve segments is changed, as well as the multiplication factor and the graph type.

Attachments:

advanced rhino.gh, 11 KB
adv. rhino.png, 123 KB

Permalink Reply by Nino Ashour on January 20, 2016 at 8:38pm

Here's my F.1.4 Definition, I got curious, so tried what Daichi Saito did by adding an extra curve and then merging them.

Attachments:

F.1.4 Grasshopper Definition Nino Ashour.gh, 7 KB

Permalink Reply by Baharak Naimi-Yazdi on January 20, 2016 at 8:55pm

Hi, this is my F.1.4 Grasshopper definition. I used 3 different curves and merged them, a straight line a curved line, and a circle. Also I would like to know why we reparameterize the curve?

Attachments:

Naimi-Yazdi_Baharak_Grasshopper.gh, 9 KB

Permalink Reply by Michael Riggin on January 20, 2016 at 9:41pm

Baharak-

Since you are using a single component that divides the curves into equal lengths, you are asking the component to figure out what that length is simultaneously for multiple curves that have different overall lengths (in your case three curves, for Daichi two). Reparameterizing the curve sets up new domain for each curve where 0 is the start and 1 is the end, and then computes the lengths of the divisions separately for each curve. The result is similar behaviors in the cross sections of all the lofted surfaces, regardless of the input curve's length or shape.

To see the difference, use three open control point curves with different lengths and shapes as the input curves for your definition, and see the difference as you toggle the reparameterize option on and off.

As a side note, the Merge Data component is not needed in the definitions posted by you and Daichi. You can just plug the curves directly into the Divide Curve component.

Permalink Reply by Luis D Garvia on January 20, 2016 at 9:53pm

Hi, I used two curves. One vertical and the other in diagonal. I try to intersect each one. For the multiplication I used double the value from one to the other. I was having travel using the graph.

Attachments:

Garcia.jpg, 323 KB
F.1.4_Garcia.gh, 10 KB

Permalink Reply by MilesAway on January 20, 2016 at 9:58pm

Nice to see everyone's work. Here's my F.1.4 assignment. I used a closed curve for my version and played with different graph types by right clicking on the graph and choosing "Graph Type".

Attachments:

patterson_f_1_4.gh, 13 KB

Permalink Reply by Brenda Joy Gabbac on January 20, 2016 at 10:20pm

Hi class,

This is my f.1.4 grasshopper definition. I also added my variation of the definition using multiple curves using the same parameters and adjusting the curve via graph mapper.

Attachments:

GABBAC - F.1.4.gh, 14 KB

Permalink Reply by Juan on January 20, 2016 at 11:09pm

HELLO GENTS AND LADS!

HERE IS MY DEFINITIONS I DID FOR F1.4.

THE FIRST ONE IS AS CLOSE TO THE BOOK.

THE SCOND ONE I ADDED TWO CURVES AND USED THE MERGE COMPONENT.

-JUAN CRUZ

Attachments:

F.1.4 Grasshopper Definition Juan Cruz.gh, 16 KB

Permalink Reply by Julio Leiva on January 20, 2016 at 11:09pm

Hi everybody,

I am posting my F.1.4 Grasshopper definitions. There is a short explanation inside the group box. First denition (left) Second definition (middle) and third definition (right) on rhino.

Attachments: