Ladybug Bug

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on June 13, 2015 at 8:30am

Hi Gera, This is usually the case for version incompatibility and you should receive a warning and not an error. Can you try to insert a new Ladybug_ladybug component into canvas and try to re-run the sunpath again? That should solve the problem. In case it didn't work please open a discussion in Ladybug's group and upload an example file (http://www.grasshopper3d.com/group/ladybug)

Permalink Reply by Sebastien Bigot on November 23, 2015 at 1:11pm

Hi Mustapha,

I have the same problem with the recolor mesh component: Too many values to unpack.

I delete honeybee and ladybug from my grasshopper and reinstalled the new version of Novembre 2015. All the component aure uploaded, with the error is still there.

I attached my file.

Thx for the help.

Seba

Attachments:

• 151120_Metro_Simulación.gh, 2.1 MB

Permalink Reply by Mostapha Sadeghipour Roudsari on November 23, 2015 at 4:33pm

Hi Sebastien,

In your case, you either need to update all the components or keep Ladybug_ladybug and Honeybee_honeybee the same version as the rest. You're using a newer version of Ladybug_Ladybug and Honeybee_Honeybee but the rest of components are from the latest release from Food4Rhino. Chris added two new inputs to legenedParameters component which is why the old component crashes. If you use the updated version (NOV_20_2015) that will work fine.

Attachments:

• 151120_Metro_Simulacin_msr.gh, 2.1 MB

Permalink Reply by Sebastien Bigot on December 6, 2015 at 4:57pm

Thanks Mostapha,

I had he version of the 8th of November.

I have changed all the new components, it works all good now.

Thank you very much, your are doing a really good work guys.