The error:No .eio file was found adjacent to the .csv _resultFileAddress.results cannot be read back into grasshopper without this file.

Hi,

When I run honeybee to carry out energy simulation, the readEPResult component does not work and the error information is "No .eio file was found adjacent to the .csv _resultFileAddress.results cannot be read back into grasshopper without this file."

What is wrong?

Best

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Chris Mackey on April 20, 2015 at 9:17pm

Nite,

Your components were not all up to date. Attached is a fully up-to-date file. It's failing because your context geometry is inside your zone.

-Chris

Attachments:

Added Warings to Run Sim.gh, 469 KB

Permalink Reply by Nitë on April 21, 2015 at 3:49am

Hi Chris,

Thanks you.I don't know why it shows that the component are old, I updated all last week.

It is still not working on my computer.I guess this time it is failing because I have no windows.

Thanks,

Attachments:

C1.JPG, 89 KB
ReportCBL.docx, 19 KB

Permalink Reply by Leland Curtis on June 12, 2015 at 1:07pm

I ran into this error as well. I fixed it by deleting the spaces in my file name. I have also found that Honeybee sometimes has trouble reading the separator that the "concatenate" command creates internally. Add the separator character manually and it works fine.