annual profiles doesnt math with the point groups

Hello everybody,

I have some problem with reading the hourly(and annual)result when I have dynamic shading, it writes me that I have different number of point groups as annual profiles.

And I know that point groups are regarded to mesh etc. but this is a really siply testbox 10x10x3m ,where is just one floor (mesh). (above it is the chart for shading operation)

Can anybody help me with that ?

Thanks a lot

Peter

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on November 18, 2014 at 10:07pm

So I gave it another try. It takes some real code change to get this fixed for multi-thread run. I re-opened the issue and will hopefully fix it during one of the coming weekends. Meanwhile you need to run it on a single thread:

https://github.com/mostaphaRoudsari/Honeybee/issues/213#issuecommen...

Permalink Reply by Abraham Yezioro on November 18, 2014 at 10:21pm

Thanks.

-A.

Permalink Reply by Mostapha Sadeghipour Roudsari on January 5, 2015 at 10:33pm

Hi Peter and Abraham,

I think I have this thing finally fixed [By think I mean I hope!]

Can you please try the attached file and let me know if it works fine for you now. I'm so ready to see there is still something missing! I wish Daysim was a little bit more user-friendly.

If this once works fine then next move is to address Peter's wish (https://github.com/mostaphaRoudsari/Honeybee/issues/236).

Thanks,

Mostapha

Attachments:

testbox0610_elchrom_msr_2.gh, 494 KB

Permalink Reply by Abraham Yezioro on January 6, 2015 at 9:00am

Hi Mostapha,

Not good news from me.

Taking your file as is, and setting the _writeRad to True gives the following red error message:

1. Solution exception:pop off of empty list

And after that no much left to do/check :-)

-A.

Permalink Reply by Peter Zaťko on January 6, 2015 at 9:14am

Hi guys,

Better news from me,

It worked for me,

but when I want to re-read the results, I cannot sort the list of ill files as the runDalyightanalysis made it, so I can´t read it back,see attached file

P.S. I have just 2 cores.

Attachments:

testbox0610_elchrom_pz_2.gh, 509 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on January 6, 2015 at 11:10pm

Abraham, I cannot reproduce the error. Can you tell me which line of the code is that? Can it be because you are using a weather file that has a problematic heading? I rarely use List.pop()

Peter, I have also updated LookUp component last night so if you use the newest one on githiub it should give you the same structure.

You are both awesome! Thank you for checking this almost real time. :)

Mostapha

Attachments:

testbox0610_elchrom_pz_2_msr.gh, 509 KB

Permalink Reply by Abraham Yezioro on January 6, 2015 at 11:39pm

Hi Mostapha,

Somehow another reply i (think) i sent doesn't show here. So the problem i mentioned is not anymore. It was a mistake from my side (picked a stat file instead epw).

I'll check the new file in a bit ...

-A.

Permalink Reply by Abraham Yezioro on January 7, 2015 at 1:59pm

Hi Mostapha,

I hope Peter can give a better answer since he started the discussion. From my test i don't see any issues. It is working for me.

Thanks,

-A.

Permalink Reply by Peter Zaťko on January 10, 2015 at 10:42am

Hi Mostapha,

I was off for a few days, now I chcecked everything and works fine for me, thank for the updated components.

Peter

Permalink Reply by Mostapha Sadeghipour Roudsari on January 10, 2015 at 11:48am