Pain Points in Grasshopper

(Edit. David sez: Please append your (well explained) ideas/suggestions/wishes. I don't care much for what you want, I care why you want it.)

Perhaps this topic has been covered recently, but I don't see any active threads. We're looking for a plugin project and I'd like to get some feedback from the power users before choosing something.

So...

What is missing from grasshopper?

What would you like to connect to that you can't already connect to?

What kind of bottlenecks do you run into?

What secret wish do you have for Grasshopper that doesn't even seem possible?

What project have you been meaning to undertake but haven't had/won't have the time?

Just trying to brainstorm a few ideas here. There are so many great and useful plugins out there, it's hard to discover the gaps anymore.

Looking forward to your thoughts!

Cheers,

Marc

Replies to This Discussion

Permalink Reply by patric guenther on July 16, 2014 at 1:24am

IFC to grasshopper scripts ???

Permalink Reply by Moonbeast on July 11, 2014 at 8:19am

Would it be possible to put something in the display settings that allows for the adjustment of the scale of planes in the viewport?

Permalink Reply by Hugh Groves on July 11, 2014 at 8:34am

You can already do this by going Grasshopper>Display>Preview Plane Radius

Permalink Reply by Danny Boyes on July 11, 2014 at 8:38am

You can already. Have a read of this: http://www.grasshopper3d.com/forum/topics/everything-you-need-to-kn...

EDIT: I see as I was getting the link Hugh posted above.

Permalink Reply by Frane Zilic on July 19, 2014 at 9:25pm

I don't know if it is possible but since this is a place for dreams I think it would be useful to have some sort or rhino listener that constructs a grasshopper definition based on the "traditional" rhino modeling. The idea is that you can model in rhino and then see a visual description of your history in GH that you can edit... No complex relations and dependencies, that is something that you would edit later... just a linear workflow to start from.

Permalink Reply by paulcoudamy on July 22, 2014 at 1:16am

A with multicore processor handeling because monocore are crazy expensives !

Thanks

Permalink Reply by Jackson Bewley on August 1, 2014 at 9:09am

I would like to have a panel that floats dynamically in the grasshopper canvas, moving with the screen as you navigate the definition. In this panel I could place a 'radio component' referencing components of the definition. On especially large definitions I would be able to reference or change inputs and component information within this dynamic panel without having to go back and forth across the definition.

Permalink Reply by PGirgen on August 1, 2014 at 7:58pm

Grasshopper is an amazing program with some amazing abilities. It has capabilities that conventional apps do not. That’s why despite being extremely proficient in a few other 3D modeling packages, I’ve chosen to dive into Grasshopper. I’m about 6 months in. If some of my comments are completely off, please take that to mean that a feature is too inaccessible to a newish user rather that it’s just missing, as I may have stated.

One of my primary pain points is this. Things that can be done in other programs are invariably easier in other programs. This is a big enough issue that I doubt there’s an easy solution that an armchair qb like myself can offer up.

The interface:

I’ve used a lot of 3D programs. I’ve never encountered one as difficult as grasshopper. What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design. Yet PTC (Parametric Technology Corp.) has been doing parametric design software since 1985 and has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others.

In the early 2000's, when parametric design software was all the rage, McNeel stated quite strongly the Rhino would remain a direct modeler and would not become a parametric modeler. Trends come. Trends go. And the industry has been swinging back to direct modeling. So McNeel’s decision was probably ok. But I have to wonder if part of McNeel’s reluctance to incorporate some of the tried and proven ideas of other parametric packages doesn't have roots in their earlier declaration to not incorporate parametrics.

A Visual Programming Language:

I read a lot about the awesomeness and flexibility of Grasshopper being a visual programming language. Let’s be clear, this is DOS era speak. I believe GH should continue to have the ability to be extended and massaged with code, as most design programs do. But as long as this is front and center, GH will remain out of reach to the average designer.

Context sensitivity:

There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them.

Sliders:

I hate sliders. I understand them, but I hate ‘em. I think they should be optional. Ya, I know I can r-click on the N of a component and set the integer. It’s a pain, and it gives no feedback. The “N” should turn into the number if set. AAAnd, sliders should be context sensitive. I like that the name of a slider changes when I plug it into something. But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly. I shouldn't be able to plug in a “50” and have everything after turn red.

Components:

Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings.

And this item I’m guessing on. I’m not yet good enough at GH to know if this may have adverse effects. Reverse, Flatten, Graft, etc.; could these be context sensitive? Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?

Tighter integration with Rhino:

I'm not entirely certain what this would look like. Currently my work flow entails baking, making a few Rhino edits, and reinserting into GH. I question the whole baking thing, btw. Why isn't it just live geometry? That’s how other parametric apps work. Maybe add more Rhino functionality to GH. GH has no 3D offset. I have to bake, offsetserf, and reinsert the geometry. I’m currently looking at the “Geometry Cache” and “Geometry Pipeline” components to see if they help. But I haven't been able to figure it out. Which leads me to:

Update all of the documentation:

I'm guessing this is an in process thing and you're working toward rolling GH from 0.9.00075 to 1.0. GH was being updated nearly weekly earlier this year. Then it suddenly stopped. If we're talking weeks before a full release, so be it. But if we're looking at something longer, a documentation update would help a lot. Geometry Cache and Geometry Pipeline’s help still read “This is the autogenerated help topic for this object. Developers: override the HtmlHelp_Source() function in the base class to provide custom help.” This does not help. And the Grasshopper Primer 2nd Ed. was written for GH 0.60007.

Grasshopper is fundamentally a 2D program:

I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen? Pretty much every 3D program in existence has this. I’m sure I can probably figure out how to deconstruct the breps, join the curves, loft, trim, and so forth. But does writing an algorithm to do what all other 3D programs do with a dialog box seem reasonable? I'm sure if you go command by command you'll find a ton on such things.

If you look at the vast majority of things done in GH, you'll note that they're mostly either flat or a fundamentally 2D pattern on a warped surface.

I've been working on a part that is a 3D voronoi trimmed to a 3D model. I've been trying to turn the trimmed voronoi into legitimate geometry for over a month without success.

http://www.grasshopper3d.com/profiles/blogs/question-voronoi-3d-con...

I’ve researched it enough to have found many others have had the exact same problem and have not solved it. It’s really not that conceptually difficult. But GH lacks the tools.

Make screen organization easier:

I have a touch of OCD, and I like my GH layout to flow neatly. Allow input/output nodes to be re-ordered. This will allow a reduction in crossed wires. Make the wire positions a bit more editable. I sometimes use a geometry component as a wire anchor to clean things up. Being able to grab a wire and pull it out of the way would be kinda nice.

I think GH has some awesome abilities. I also think accessing those abilities could be significantly easier.

Permalink Reply by David Rutten on August 2, 2014 at 2:11am

Hi P,

I don't have much time before my ride arrives, but I'll quickly try and respond to each point:

Interface.

"I've used a lot of 3D programs. I've never encountered one as difficult as grasshopper."
I'm sorry to hear that, I take the interface and ease-of-use rather seriously so this sounds like a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative.

"What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."
Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it.

"[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."
Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.

This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Visual Programming.

I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
Context sensitivity.

"There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."
Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?

I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal this time around is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.

You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
Sliders.

"I think they should be optional."
They are optional.

"The “N” should turn into the number if set."
What if you assign more than one integer? I think I'd rather see a component with inputs 'N', 'P' and 'X' rather than '5', '8' and '35.7', but I concede that is a personal preference.

"But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly."
Agreed.
Components.

"Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."
I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data.

"Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"
It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
Integration.

"Why isn't it just live geometry?"
This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry.

"Maybe add more Rhino functionality to GH. GH has no 3D offset."
That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).

On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
Documentation.

Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.

Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
2D-ness.

"I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"
I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
Organisation.

Agreed. We need to come up with better ways to organise, document, version, share and simplify GH files. GH1 UI is ok for small projects (<100 components) but can't handle more complexity.

Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.

David Rutten

david@mcneel.com

Permalink Reply by Santiago Diaz on August 2, 2014 at 11:20pm

You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.

Agreed

Permalink Reply by PGirgen on August 3, 2014 at 3:38am

1. Interface.

"I've used a lot of 3D programs. I've never encountered one as difficult as grasshopper."

I'm sorry to hear that, I take the interface and ease-of-use rather seriously so this sounds like a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative.

I get that. That’s why that 3D shape I’m trying to apply the voronoi to was done in NX. I do wonder where the GUI metaphor GH uses comes from. It reminds me of LabVIEW.

"What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."

Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it.

It’s not the primary components that catalyzed this thought but rather the secondary components. I was toying with a component today (twist from jackalope) that made use of three toggle components. The things they controlled are checkboxes in other apps.

Take a look at this jpg. Ignore differences; I did 'em quickly. GH required 19 components to do what SW did with 4 commands. Note the difference in screen real estate.

As an aside, I really hate SolidWorks (SW). But going forward, I’ll use it as an example because it’s what most people are familiar with.

"[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."

Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.

I agree, and disagree. I believe parametric applies equally to GH AND SW, NX, and so forth, while algorithmic is unique to GH (and GC and Dynamo I think). Thus I understand why you prefer the term. I too tend to not like referring to GH as a parametric modeler for the same reason.

But I think it oversimplifies it to say parametric modelers move the clicks. SW tracks clicks the same way GH does; GH holds that information in geometry components while SW holds it in a feature in the feature tree. In both GH and SW edits to the base geometry will drive a recalculation, but more commonly, it’s an edit to input data, beit equations or just plain numbers, that drive a recalculation.

I understand the difference in these programs. What brought me to GH is that it can create a visual dialog that standard modelers can’t. But as I've grown more comfortable with it I’ve come to realize that the GUI of GH and the GUI of other parametric modelers, while looking completely different, are surprisingly interchangeable. Do not misconstrue that I’m suggesting that GH should replace it’s GUI with SW’s. I’m not. I refrain from suggesting anything specific. I only suggest that you allow yourself to think radically.

This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.

Given a choice, I'd pick kick-ass algorithmic modeller with no parametrics tacked on.

2. Visual Programming.

I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.

I'll admit, this is a bit tough to explain. As I've re-read my own comment, I think it was partly a precursor to the context sensitivity point and touched upon other stated points.

This now touches upon my own ignorance about GH’s target market. Are you moving toward a highly specialized tool for programmers and/or mathematicians, or is the intent to create a tool that most designers can master? If it’s the former, rock on. You’re doing great. If it’s the latter, I’m one of the more technically sophisticated designers I know and I’m lost most of the time when using GH.

GH allows the same freedom as a command line editor. You can do whatever you like, and it’ll work or not. And you won’t know why it works or doesn't until you start becoming a bit of an expert and can actually decipher the gibberish in a panel component. I often feel GH has the ease of use of DOS with a badass video card in front.

Please indulge my bit of storytelling. Early 3D modelers, CATIA, Unigraphics, and Pro-Engineer, were unbelievably difficult to use. Yet no one ever complained. The pain of entry was immense. But once you made it past the pain threshold, the salary you could command was very well worth it. And the fewer the people who knew how to use it, the more money you could demand. So in a sense, their lack of usability was a desirable feature among those who’d figured it out.

Then SolidWorks came along. It could only do a fraction of what the others did, but it was a fraction of the cost, it did most of what you needed, and anyone could figure it out. There was even a manual on how to use it. (Craziness!) Within a few short years, the big three all had to change their names (V5, NX, and Wildfire (now Creo)) and change the way they do things. All are now significantly easier to use.

I can tell that the amount of development time that’s gone into GH is immense and I believe the functionality is genius. I also believe it’s ease of use could be greatly improved.

Having re-read my original comments, I think it sounded a bit snotty. For that I apologize.

3. Context sensitivity.

"There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."

Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?

I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal [...] is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.

You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.

You bring up both interesting points and limits to my understanding of coding. I’ve reached the point in my learning of GH where I’m just getting into figuring out the sets tab (and so far I’m not doing too well). I often find myself wondering “Is all of this manual conditioning of the data really necessary? Doesn’t most software perform this kind of stuff invisibly?” I’d love to be right and see it go away, but I could easily be wrong. I’ve been wrong before.

5. Components.

"Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."

I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data.

I kinda like this. It’s a continuation of what you’re currently doing with things like the panel component.

"Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"

It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.

6. Integration.

"Why isn't it just live geometry?"

This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry.

"Maybe add more Rhino functionality to GH. GH has no 3D offset."

That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).

On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.

You work for McNeel yet you seem to speak of them as a separate entity. Is this to say that there are technical reasons GH can only access things through the Rhino SDK? I’d think you would have complete access to all Rhino API’s. I hope it’s not a fiefdom issue, but it happens.

7. Documentation.

Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.

Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.

It begs the question that I have to ask. When is GH1.0 scheduled to launch? And if you need another person to proofread the current draft of new primer.

patrick@girgen.com

I can’t believe wikipedia has an entry for feature creep. And I can’t believe you included it. It made me giggle. Thanks.

8. 2D-ness.

"I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"

I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.

I believe it’s been helpful for me to have figured this out. I recently completed a GH course at a local Community College and have done a bunch of online tutorials. The first real project I decided to tackle has turned out to be one of the more difficult things to try. It’s the source of the questions I posted. (Thanks for pointing out that they were posted in the wrong spot. I re-posted to the discussions board.)

I just can't seem to figure out how to turn the voronoi into legitimate geometry. I've seen this exact question posted a few times, but it’s never been successfully answered. What I'm showing here is far more angular than I’m hoping for. The mesh is too fine for weaverbird to have much of an effect. And I haven't cracked re-meshing. Btw, in product design, meshes are to be avoided like the plague. Embracing them remains difficult.

As for offsetsurf, in Rhino, if you do an offsetsurf to a solid body, it executes it on all sides creating another neatly trimmed body thats either larger or smaller than the original. This is how every other app I know of works. GH’s offsetsurf creates a bunch of unjoined faces spaced away from the original brep. A common technique for 3D voronois (Yes, I hit the voronoi overuse easter egg) is to find the center of each cell and scale them by this center. If you think about it, this creates a different distance from the face of the scaled cell to the face of the original cell for every face. As I've mentioned, this project is giving me serious headaches.

David Rutten

Thank you for taking the time to reply David. Often we feel that posting such things is send it into the empty ether. I’m very glad that this was not the case.

And thank you for all of the work you've put into GH. If you found any of my input overly harsh or ill-mannered, I apologise. It was not my intent. I'm generally not the ranting sort. If I hadn't intended to provide possibly useful input, I wouldn't have written.

Cheers

Patrick Girgen

Ps. Any pointers on how to get a bit further on the above project would be greatly appreciated.

Permalink Reply by Santiago Diaz on August 2, 2014 at 11:13pm

So, it's been a couple months since this thread was originally posted.

Have you chosen what your plugin project will be?

Do you have a short list to choose from?

Just wondering...