problem with construct Location

Replies to This Discussion

Permalink Reply by Abraham Yezioro on March 24, 2014 at 6:27am

Can be that you didn't let the Ladybug fly?

Though i tried without it and it works for me ...

-A.

Permalink Reply by Marco Paselli on March 24, 2014 at 6:31am

Yes I actually forgot to let it fly...I fixed it but still doesn't work...

Permalink Reply by Mostapha Sadeghipour Roudsari on March 24, 2014 at 8:48am

The outputs of your components seems to be changed from what it should be. It should be location and not out. Replace the current component with a new one from Ladybug tab.

Permalink Reply by Marco Paselli on March 24, 2014 at 8:51am

this is what I get by default from the Ladybug tab...

thank you

marco

Attachments:

• ScreenShot004.png, 14 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on March 24, 2014 at 9:01am

Hi Marco. You are using an old version of GHPython. Update to the latest version (GHPython 6.0.0.3) and it will get all fixed. -Mostapha

Permalink Reply by Marco Paselli on March 24, 2014 at 9:11am

Hello,

thank you but unfortunately it didn't work, now I cannot even place the component in the canvas...

Attachments:

• ScreenShot006.png, 13 KB

Permalink Reply by Marco Paselli on March 24, 2014 at 9:21am

Ok I fixed it, it was just about unlocking the new python.gha

Thanks a lot for you help

Marco

Permalink Reply by Eblis Zhang on March 29, 2014 at 5:39pm

Hi M

I got the same problem like you experienced. Could you tell me how can I unblock the GHpyhton, Does it mean just use this the latest version to replace it? Thanks!!

Permalink Reply by Marco Paselli on March 29, 2014 at 6:34pm

Hi eblis,

When you paste the ghpython in the component folder right click on the file and open the properties , there you should find thr button "unlock".

Cheers
M