Window/Blinds state

Hi,

Are we able to set the state of the window (open/close) and blinds (open/partial/close) in honeybee/ladybug?

Thank you,

Vinu

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on April 16, 2015 at 4:19pm

The short answer is yes and yes. For blinds check "Honeybee_EnergyPlus Window Shade Generator" and for closing and opening windows check "Honeybee_Set EP Air Flow" (setEPNatVent) There are discussions for both of them on the group.

Permalink Reply by Vinu Subashini on April 20, 2015 at 8:50am

Thank you!

Permalink Reply by Chris Mackey on April 20, 2015 at 10:34pm

Mostapha basically said it all. I will just add that, if you need a fine level of control over when they open and close, you can make a custom CSV schedule and input this into the components Mostapha listed.

Here's a tutorial for making your own custom CSV schedule:

https://www.youtube.com/watch?v=b7ZQ5sazwrU&list=PLruLh1AdY-SgW...

-Chris

Permalink Reply by Vinu Subashini on April 20, 2015 at 11:08pm

Thank you Chris!

RSS