Problem about Position of shade

Hi Everybody,

I tried to use "Honeybee_EnergyPlus Window Shade Generator" to created a shade for a windows, I set "interiorOrExter_" to "True", but the shade is displayed on outside of room.

An other question, how to check/display the normal direction of the surface?

May I get some help from someone, how to move the shade to inside room.

Thanks advance.

Solon.

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Omid Rashidi on March 9, 2017 at 5:44am

Hi,

please find attached.

best,

Omid

Attachments:

SrfN_OMD.gh, 539 KB

Permalink Reply by Solon on March 10, 2017 at 8:37am

Hi Omid Rashidi,

Thank you very much, the problem was solved according to your solution.

Solon.

Permalink Reply by Solon on March 10, 2017 at 6:09pm

Hi Omid Rashidi,

I checked your solution again, It seem there is an other problem, if the setting of "ShadeType_" of "Honeybee_EnergyPlus Window Shade Generator" is "1", the display is correct, but if the setting of "ShadeType_" is "0", and change the direction of window and single wall(bypass the "Flip" component), the position of shade can not be changed accordingly. it seems it is a bug.

Solon

RSS