Ladybug Radiation Analysis Legend not appearing

Replies to This Discussion

Permalink Reply by Chris Mackey on August 15, 2014 at 6:53am

Hi Dimitrios,

I am pretty sure that I know why this is happening. It is because of the function that generates legends for all ladybug components.

For any legend in Ladybug, if the range from the highest to lowest values of the radiation mesh is less than 0.1, the legend is collapsed as this means that the legend would have to include values smaller than 2 decimal places. This feature was put in because a large number of decimal places could look weird in a lot of cases. Also, this was originally OK since most data that was viewed with the legend was larger than 2 decimal places. However, now that the hourly radiation is viewed in kWh and the legend is being used for EnergyPlus data now that sometimes have ever small differences, I would say that it is time to edit this function for small decimal place situations.

I will try to get around to this soon and, in the meantime, you can get the legend range to be stable by using the ladybug legend parameters component.

Permalink Reply by Dimitrios Papadopoulos on August 15, 2014 at 7:32am

Hi Chris,

Thank you very much for the response!

I assumed it had to do something with the setting in the range of the values but wasn't sure what.

I ll use fixed min/max values for the time being.

Thanks again!

Dimitris

Permalink Reply by Mostapha Sadeghipour Roudsari on August 15, 2014 at 4:54pm

Added to github: (https://github.com/mostaphaRoudsari/ladybug/issues/77). Thank you both.

Permalink Reply by Dimitrios Papadopoulos on August 18, 2014 at 7:53am

Glad to be of help!

Thank you!

Dimitris

Permalink Reply by Amy Elshafei on March 23, 2015 at 11:59am

Hi Chris

Is there a way to project the felt tempreture on a plane rather than on the person? Or relate the Radiation Analysis to a temprature graph?

Permalink Reply by Mostapha Sadeghipour Roudsari on April 4, 2015 at 7:15pm

Hi Amy, I think it is possible but Chris can give you the final answer about this. I would open a new discussion for this. -Mostapha

Permalink Reply by Amy Elshafei on April 7, 2015 at 3:49am

Thank you. I will open a new one

Permalink Reply by Peter Zaťko on April 7, 2015 at 5:28am

Hi Amy,

You should make a new discussion here in the LB_HB group, or if you want I can make, cause I'm interested in this topic also.

regards

Peter

Permalink Reply by Amy Elshafei on April 7, 2015 at 6:55am

Hi Peter,

here is the link

http://www.grasshopper3d.com/group/ladybug/forum/topics/felt-temper...

Regards

Amy