how to use honeybee to analyse the air-conditioning energy consumption and indoor temperature？

hi，guys

As a beginner in honeybee，i want use honeybee to analyse energy，but i don't know how to set different material types of walls and roof ，set different thermal conductivity. I also don't know how to display relevant parameter such as chiller（electricity）、sensible cooling、total cooling、operative temperature、outside dry-bult temperature separately，and i have problems in use which battery and how to connect them。

can anyone help？ thanks.

sherly

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Chris Mackey on July 6, 2017 at 4:50am

Here's more than 5 hours of video tutorials on Honeybee energy modeling:

https://www.youtube.com/playlist?list=PLruLh1AdY-SgW4uDtNSMLeiUmA8Y...

Permalink Reply by sherly on July 9, 2017 at 2:14am

Hello,Chris

Thanks for your rely，I watch the whole video and learn a lot . but I met some problems.

1、I set four room 0/1/2/3,room2 have green roof , I want to measure the chiller electricity between room 1and2,but I’m not sure is the “cooling” output from “readEPresult” is the chiller electricity I want.

2、i use your greenroof parameters in your” Green_Roof_In_Energy_Model”and change a bit ,though the component didn’t show wrong, I’m not sure my change is right,can you help me to check it?

3、i use cnetral air-conditioning and want to set the Indoor comfort temperature in 26,but I can’t find how to set it ,I try to set cooling setpoint but it didn’t work and my “run energy sumliation”turns red.

Can you help me?

watching for your reply. thanks in advance.

Yours

sherly

Attachments: