Appcrash, fault modul opennurbsx64.dll

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on September 5, 2015 at 11:49pm

Hi Fahimeh,

This can be because of Rhino, Galapagos or Honeybee. You should report this under Errors and Bugs with an example file so hopefully David can re-generate the error and tell you why this is happening. I'm not sure if David will see the error here.

Mostapha

Permalink Reply by Fahimeh Motazedian on September 5, 2015 at 11:55pm

Thanks Mostafa,

Ok, I will write there with an example.

Fahimeh

Permalink Reply by Fahimeh Motazedian on September 6, 2015 at 11:49am

Hi Mostafa,

I wrote my problem in this link:

http://www.grasshopper3d.com/forum/topics/appcrash-error?commentId=...

Unfortunately, David couldn't help me find the problem, at least he suggests waiting to see if it will crashes on Rhinoceros 6 and that's a long time for me.

Do you have any other suggestion for me with this file? Is there any other way to get the results (I want to find the best angle and dimension of a lightshelf in every hour on some specific days). It took a long time for me to learn Hb and it's not logical to leave in this stage inconclusive.
Thanks

Attachments:

• 5-1.gh, 512 KB

Permalink Reply by Mostapha Sadeghipour Roudsari on September 7, 2015 at 7:03am

Hi Fahimeh.

I checked your file and I'm confused what you're trying to do. Are your goal is only to model a room and optimize it for daylight or is it going to be also an energy model at some point? Is the size of the room stays the same during the whole study?

In any case you need to model light-shelves as separate surfaces and not part of the zone.

Also there is also so many extra components in your definition. I would only leave the components which are critical to the study for an optimization case as you need to run so many cases.

Let me know what are you exactly trying to do and we'll look for alternate solutions.

Mostapha

Permalink Reply by Fahimeh Motazedian on September 7, 2015 at 9:58am

Hi Mostafa,

Thanks for looking at my file,
I didn't understand why lightshelf shouldn't be a part of the zone.
Using the components such as TT toolbox, was because I wanted to save results in any stage that Rhino stops working, so exported data to excel, it can be deleted, not important.

My final goal is to build and find the mechanism of dynamic lightshelf,

an exterior lightshelf that its angle is variable, and an interior lightshelf that its length is variable, the room and the window stays the same during the hole study.

for this, there are 2 ways (If I am making a mistake, let me know):

1. to optimize lightshelves based on desired illuminance in each hour.

2. to optimize lightshelves based on thermal and lighting energy in each hour.

Simulation will be repeated in some days as sample for expanding to the whole year.

I am doing the first step (although I wrote an algorithm for the second one, but I thought it takes longer time and the appcrash possibility is higher than the first one)
Hope that explanation was good and enough,

thanks a lot

Fahimeh

Permalink Reply by Fahimeh Motazedian on September 12, 2015 at 9:48am

Mostafa,

did you read my comment? Do you have any idea?