Units in Rhino vs Revit Through Hummingbird

Hi guys,

Just arrived into Hummingbird, I'm exporting from rhino trhough GH a series of 3points adaptive components structured into a tree structure.

Everything seams to work fine but, the units are not right. The model in Rhino is in metres, when It arrives in Revit, The units seams to be random. (for instace a panel that is 3m in Rhino becomes 916mm in Revit). I'm not sure how to control the scale during the transfert. I've also used the option Use Factor (To internal FT) but nothing seams to work properly.

I will much appreciate any help.

Thank you in advance

Cheers

Claudio

Replies to This Discussion

Permalink Reply by Mario Guttman on January 6, 2016 at 9:56am

Please send a sample file and screenshots to admin@whitefeet.com and I will look at it. Mario

Permalink Reply by Claudio on January 7, 2016 at 6:43am

Thank you Mario for your reply. But I finally figure the factor required to import to revit. There is a slight difference roughly 10mm difference between the rhino file and the revit components. I guess it's due to revit internal units (ft).
Thank you for sharing this wonderful tool. It's very helpful.
Regards
Claudio

RSS