Waffle model help!

Replies to This Discussion

Permalink Reply by Hannes Löschke on March 5, 2012 at 2:28pm

simplified the pathmapper

removed the unneccessary cross reference from top branch

flipped the notch curves matrix as they were in the wrong order.

Attachments:

• waffle_def_01.gh, 16 KB

Permalink Reply by Artyom Maxim on March 6, 2012 at 7:52am

Great, thanks so much)

How did you figure out that they are in a wrong direction? 

Permalink Reply by Hannes Löschke on March 6, 2012 at 8:16am

In cases like that i usually try to single out braches and ListItems that should combine and check if the inputs are make sense.

Here I use ExplodeTree to inspect only the first branch.

Permalink Reply by Artyom Maxim on March 6, 2012 at 8:33am

Seems a good way to debug things, thanks! 

 

btw, could you please take a look at one more issue, have no idea what's wrong...

 

Attachments:

• waffle_form_02.gh, 38 KB

Permalink Reply by Artyom Maxim on March 6, 2012 at 9:32am

Problem solved- the intersections between parts weren't good enough for Sdiff x_x

 

Permalink Reply by fernando molas garcia on March 6, 2012 at 10:48am

I studied your code. Very interesting.
I have a code that does something similar but different approach. When you use the sdifffuncioncion consume "a lot" computational resource.
I send you my code to see another approach.

Then I will try to do something with polygons

Attachments:

• lampara 3.3dm, 178 KB
• lampara3.gh, 22 KB

Permalink Reply by fernando molas garcia on March 6, 2012 at 12:32pm

another version but with polygons. In my case I prefer to control the geometry of the vertical ribswith curved screen rhino.

Attachments:

• lampara poligono.3dm, 177 KB
• lampara (poligono).gh, 24 KB

Permalink Reply by Artyom Maxim on March 11, 2012 at 5:42am

Hello,

sorry, couldn't respond earlier..

Checked your definitions, obviously the second method is faster. Thanks for sharing, I'll try something similar to that sometime)