Voronoi in box/voronoi 3D/skeleton

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on January 7, 2016 at 6:49am

Hi.

There are so many relevant thread about 3d-voronoi skeletal framing, so you can easily find and try this method.

You'll need Exoskeleton and Topologizer +Weaverbird plug-ins

Beware some slider twicking will break the definition, so, you'll have to find fine combinations between topologizer's tolerance and Exowireframe's slider values.

Attachments:

• voronoibox_re.gh, 12 KB

Permalink Reply by Stella Page on January 7, 2016 at 12:19pm

kim, 

Thank you, you are the best !

Permalink Reply by Stella Page on January 8, 2016 at 10:21am

I am trying to get an effect as per picture 001, but i can't with the definition I have, where I am making the mistake?

http://www.grasshopper3d.com/profiles/blogs/jewelry-design-with-vor...

Attachments:

• 001.JPG, 33 KB
• voronoi box_OK_02.gh, 13 KB
• voronoi box_OK_02.3dm, 3.3 MB

Permalink Reply by Hyungsoo Kim on January 8, 2016 at 11:52am

They are not the same thing. I don't think you quite understand the difference.

Attachments:

• VoronoiRing.gh, 23 KB

Permalink Reply by Stella Page on January 11, 2016 at 4:17am

I understand that these two definition do different things and generate a different result. Probably I explained wrong what I would like to achieve. The idea is to have a voronoi pattern but on a box 800x800x150mm, that is similar on what there is on the ring. which then I will CNC with the robot here in the lab. 

thank you 

Attachments:

• Studio-AIR.jpg, 366 KB