Using Attractor Points to Vary Height and Size of a Geometry on a surface

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on June 8, 2016 at 9:22am

Hi.

What do you mean by "vary the distance between the geometries"?

Anyway, check attached. Best.

Attachments:

• VesselShape_1_re.gh, 17 KB

Permalink Reply by Marianne Mordhorst on June 8, 2016 at 9:45am

This is very helpful thank you!

I meant by "vary the distance between geometries" is have the distance increase between each shape based on the attractor point.

One additional question - when I bake the surface box and the morphed geometry, the geometry is hidden inside the boxes.  I am trying to have a solid vessel with the geometry extruded on the outside.  Is there an adjustment for this?

Thank you!

Permalink Reply by Hyungsoo Kim on June 8, 2016 at 10:06am

Still cann't understand.  distance between geometries of what?

And. Try bake blue one together.

Attachments:

• VesselShape_1_reV2.gh, 20 KB

Permalink Reply by Marianne Mordhorst on June 8, 2016 at 10:19am

Thats great - thanks!

What I mean is have the 3d shape (attached) close together and farther apart based on the attractor point.  They are all evenly spaced in relationship to each other around the surface.  Is there a way to have greater distance between them based on the attractor point? At the top the height is less and the size is less - can the distance between each be greater and then as the height and size increase toward the bottom the distance between them is smaller?

Attachments:

• Capture.PNG, 28 KB

Permalink Reply by Hyungsoo Kim on June 8, 2016 at 10:39am

It is still hard to understand, you'll probably need another logic different from "Box Morph".

Maybe someone in ths forum could understand your intension and will help you.

Try post another discussion with proper explanation(which means sketchs or something).