Grasshopper

algorithmic modeling for Rhino

Universal Curtain Wall from Surface

Alright Guys, 

So I made this code about that would make a curtain wall out of any Planar surface.

This code is to help many grasshopper Architects build models much faster and easier. 

Please If you have any idea about how to make the code more universal. That it would also work on non planar surfaces. 

Feel Free to post improvements below

Thanks, 

Views: 5484

Attachments:

Replies to This Discussion

Permalink Reply by Kim hauer on December 3, 2016 at 9:42am

FYI: Technically what you have scripted is a Lattice, where the horizontal members overlap the vertical members. In a Curtain Wall the horizontal members are inline with the vertical members, this is required so the glazing can be installed into each opening.

Permalink Reply by peter fotiadis on December 3, 2016 at 10:13am

Well ... it depends upon the aluminum (or steel: Jansen Viss and the likes) series in use.

Only in structural (avoid) or semi-structural (use) systems the glazing/panels define 100% the "front" application plane (with regard the profiles).

BTW: Things become quite (or very) complicated in curvy facades.

Permalink Reply by Kim hauer on December 4, 2016 at 11:48am

RSS

About

Scott Davidson created this Ning Network.

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service