Sweep with slider

Replies to This Discussion

Permalink Reply by Joseph Oster on November 26, 2015 at 9:28am

Two ways:

1. 'Point on Curve (CurvePoint)'
2. 'Evaluate Curve (Eval)' - use 'Reparameterize' on the 'C' input

Permalink Reply by Daniel Sosa Ibarra on November 26, 2015 at 9:53am

Hi Joseph, thanks but that only add a point on the curve that doesn´t handles the growth of extrusion like in the previous pictures, no?

The sweep component has rail and section as imputs, in the solution wich one is the new rail? It´s possible to evaluate the polyline only up to the new point on curve?

Permalink Reply by Rémy Maurcot on November 26, 2015 at 10:13am

It's a track start that Joseph started to explain.
Here is my method:

Attachments:

• SliderSweep.gh, 7 KB

Permalink Reply by Daniel Sosa Ibarra on November 26, 2015 at 11:45am

Thanks Rémy! It work perfect!

Permalink Reply by Joseph Oster on November 26, 2015 at 11:46am

'SubCrv' is good!  Forgot about that one, handy.

Attachments:

• Sweepwithslider_2015Nov26d.gh, 14 KB

Permalink Reply by Joseph Oster on November 26, 2015 at 10:27am

'Shatter' the curve to get part of it for the rail:

Attachments:

• Sweepwithslider_2015Nov26.gh, 11 KB

Permalink Reply by Joseph Oster on November 26, 2015 at 11:18am

And why not rotate the resulting sweep at any point along the curve?  Just for fun.

Attachments:

• Sweepwithslider_2015Nov26c.gh, 17 KB

Permalink Reply by Daniel Sosa Ibarra on November 26, 2015 at 11:48am

Thanks Joseph! Shatter works great!

Also the rotation could be useful for what I´m looking for ;)