Surface Division Problem

Hey Guys, I have a seriuous problem with the division of a surface. When I divide it by DivideDomain², then putting surface boxes on the parts, it looks like on the foto. But that's not, what i want. I want, that the parts are nearly equal. Why does it look so unequal? I attached an image of the tutorial, for what it should look like and two images from my definition... Thanks for your help, I really need a solution... ;)

Replies to This Discussion

Permalink Reply by Patrick on April 29, 2011 at 8:08am

Does nobody has an answer? Im getting crazy... I tried it the whole day.. :(

Permalink Reply by Pieter Segeren on April 29, 2011 at 10:41am

Hi Patrick, I can't tell just by looking at the pictures, can you upload your definition and curves?

Permalink Reply by Patrick on April 29, 2011 at 11:58am

Sure! Thank you!!!

Attachments:

Ohne Titel.3dm, 58 KB
unnamed.ghx, 513 KB

Permalink Reply by Pieter Segeren on April 29, 2011 at 2:18pm

This is how I would do it:
Maxim already explained why it went wrong before.

Attachments:

Patrick unnamed PSG.ghx, 406 KB

Permalink Reply by Maxim Baraliuc on April 29, 2011 at 1:12pm

The divisions became uneven, because so was created the base geometry (the spline points – it can be seen when you select the spline and hit F10). You can try to use an arc instead.

Attachments: