Start a new line using text tag?

Replies to This Discussion

Permalink Reply by Darren Chang on July 20, 2012 at 8:53am

This is what I did to start each text on a new line.... but I really believe there should be a simpler/built-in way of doing it

 

Permalink Reply by HEEN on December 10, 2017 at 3:12pm

I would like to know how to paneling in that way

Permalink Reply by Andrew Heumann on July 20, 2012 at 12:25pm

There is a "return" character. If you use the "Join strings" component and set the join character to a panel where you've just typed enter/return, (make sure multiline data is checked on this panel), you should get a single string with multiple lines. It will only work with the 3d text tag component - the regular text tag can only display single lines.

Permalink Reply by Darren Chang on July 20, 2012 at 7:11pm

Hi Andrew, what you said works. But all my texts are actually parameters read from somewhere else, rather than just something I write manually into a panel.

Permalink Reply by Andrew Heumann on July 23, 2012 at 11:20am

What I said still applies. You can use the "join strings" component to join a list of N strings, separating each string (dynamic or otherwise) with the return character. Only the single panel with a carriage return in it needs to be specified manually. 

Permalink Reply by Olivier Suire on March 1, 2017 at 7:15am

Thanks Andrew, this just made my day :)

Permalink Reply by Xu on December 13, 2018 at 3:15am

Thank you!!