Solid difference in grasshopper

Reference_geometry.3dmHi, basicaly, I would like to cut off a set of volumes with surfaces, but I think I'm having a problem with the lists at the end of the script. So I'll try to explain it as clearly as possible, sorry if I don't succeed...

So I have these volumes, following the curve drawn in rhino with orientation following de «normal» of the base curve. Then, I would like these surfaces to trim the tip of the volumes. The surfaces are facing the closest point I positioned in rhino. At the end, I would like the prism volumes to have one face facing the closest point.

For accomplishing that, I placed a rotate 3d component so as to rotating the surface following the closest point. Then, you have a scale component that extends de surface. At the end, I want to trim the prism volumes so that they have the final shape without the trimed part.

In the end, I don't succeed triming the part of the volume I dont want.

Thank you for your time!

Attachments:

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Michael Pryor on October 6, 2017 at 12:51pm

Upload file

Permalink Reply by Philippe Vezina on October 6, 2017 at 1:55pm

My bad! I just add it

Permalink Reply by Chapulin Colorado on October 6, 2017 at 2:06pm

Hi,

your reference geometry is still missing but seeing the picture, maybe try flatten the B

Permalink Reply by Philippe Vezina on October 6, 2017 at 3:07pm

Here is the reference geometry

Attachments:

Reference_geometry.3dm, 76 KB

Permalink Reply by Chapulin Colorado on October 6, 2017 at 3:30pm

it still fails to reference

Permalink Reply by Philippe Vezina on October 7, 2017 at 1:07pm

I'm sorry, i'm still new on grasshopper and I don't know what you mean by referencing the file. Is there a way to reference the rhino file to the grasshopper one?

Thank you

Permalink Reply by Hyungsoo Kim on October 7, 2017 at 2:04pm