sift pattern and combine data problem

Replies to This Discussion

Permalink Reply by Chapulin Colorado on August 13, 2016 at 10:44am

hey,

not sure if you trying to do this?

its the partition list component.

regards

Permalink Reply by Matt Gaydon on August 13, 2016 at 1:45pm

You can just use the cull pattern component (your option 2) (Instead of sift then clean tree) then partition component as suggested by Chapulin above.

Permalink Reply by Matt Gaydon on August 13, 2016 at 2:06pm

You could also create the outcome you want if you connect 2 Series components together,

I am not on a machine with GH at the moment so can't post an example. The first one needs the step size set at 6 and then this plugged into the start input of the second and the second one just needs the count set at 3.

I think that's it

Permalink Reply by Chapulin Colorado on August 14, 2016 at 7:54am

yep, your right matt,nicer this way

Permalink Reply by Findie on August 14, 2016 at 10:01pm

thank you so much for your help and solutions.

both work just fine.

eventually i used the pathmapper  {a;b}[i]    to    {a;i/3}   

which worked as well!!!!