Shutter problem

Replies to This Discussion

Permalink Reply by Jerrimo on November 11, 2010 at 11:45am

I still couldnt figure it out why I get different brunches in this case.
Is it a bug ore what am I doing wrong here?

Permalink Reply by Jerrimo on November 12, 2010 at 2:31am

I cleand up the definition. So maybe it helps if someone has a look at it.
The aim is as you can see in the image below to map the intersection points of the wavy surfaces onto the unrolled lines. In one case I got it to work but in the other case not. The main problem is really the shutter component, because it is working different and i don´t know why. Maybe someone has an other idea.
Any help is really much appreciated

By the way I am working with GH 0.7.57.

Attachments:

• WaveSurface.3dm, 1.7 MB
• Waveunroll_discussion.ghx, 1.5 MB
• image.png, 143 KB

Permalink Reply by Danny Boyes on November 12, 2010 at 3:00am

Hi Jerrimo,

The problem you face is that the curve taken from the Brep Explode component has a domain going from -15 to 0 and that the original curve that you got the t values from is 0 to 15. I don't know if what I've done here fixes it but it shows the shatter component working on the curve.

Permalink Reply by Jerrimo on November 12, 2010 at 12:02pm

Wow Danny,
thanks for the smart and easy solution. It works perfactly!!!!!!

Permalink Reply by Jerrimo on November 16, 2010 at 2:25pm

I am facing now the problem that if I map the intersection points onto the unrolled curves, they are not in right order anymore. I hope someone has an idea how to fix that. Thank you in advance.

Attachments:

• Pointmapping.3dm, 67 KB
• Pointmapping.ghx, 2.7 MB
• Pointmapping.png, 79 KB