setup lady-bug and honey-bee

Replies to This Discussion

Permalink Reply by Devang Chauhan on November 22, 2016 at 10:38am

Hi SY,

I could take a look if you share the GH file. However, by looking at the attached image, it looks more like a grasshopper problem.

Devang

Permalink Reply by S Y on November 22, 2016 at 11:05am

Hi Devang here it's the  GH file

Attachments:

• sy.gh, 1 KB

Permalink Reply by Devang Chauhan on November 22, 2016 at 11:09am

Hi SY,

I believe you did not place ladybug_ladybug component on the canvas. Always remember to do that if you want to use any of the ladybug tools. The same holds true for Honeybee. In order to use Honeybee, you need to put Honeybee_Honeybee on canvas.

Devang

Permalink Reply by S Y on November 22, 2016 at 6:51pm

Hi Devang ,
I managed to solve a part of the problem thanks alot  for your concern but still there is part of it still not solved yet. when i load some item of honeybee  new message appear differ from the first one i attached a shot of what appeared to me .

excuse me for my questions as it's the first time to use the program 
S Y

Permalink Reply by Andy Lee on November 22, 2016 at 11:28am

Hi SY,
I also met this problem 2 days ago but I have overcome that just by looking at guidances here. In my case, everything has resolved by installing GhPython, but not the most recent version, it's ver 0.5.101. It's working perfectly for me now... Hopefully, you can get something with what I've tried.

Cheer,
Andy

Permalink Reply by S Y on November 22, 2016 at 7:11pm

Hi Andy Lee,

yeah ,it's was the like the same to me . i didn't know that it's essential to install Ghpython first thank you very much . a part of the problem is solved after installing it but still there is something i don't  know what to do as i replied to Devang when i load some items from honey bee it couldn't be loaded and there is a message appeared to me  as below 

Permalink Reply by Mostapha Sadeghipour Roudsari on November 22, 2016 at 9:25pm

This has been discussed on Ladybug forum multiple times. I suggest you to do a search there. It's usually because: 1. GHPython is not installed. 2. GHPython is installed but is blocked. 3. GHPython is installed but Rhino needs to be updated.

Permalink Reply by S Y on November 23, 2016 at 6:53am

Thank you Mostapha 

Permalink Reply by Devang Chauhan on November 22, 2016 at 8:35pm

Hi SY,

Did you do everything recommended in these notes?

Devang

Permalink Reply by S Y on November 23, 2016 at 6:55am

no, i know now that it is the problem thank you Devang