Grasshopper

algorithmic modeling for Rhino

Rotation method or Evaluate Surface method.

i am working on orienting and tagging a serie of closed curves. i used the Evaluate Surface Compound but i am having a problem with the xy point orientation on the sections i made. they simply do not share the same orientation as shown the photo below.

i am trying to orient the sections with the orientation tools but no success. i need the sections to be oriented accordingly flat on the xy surface.

any help would me appreciated.

p.s: i am using the WIP on Mac.

thanks,

Zadig

Views: 563

Attachments:

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on August 18, 2016 at 6:31am

Just like this?

Attachments:
Permalink Reply by Zadig on August 18, 2016 at 5:19pm

i appreciate a lot your help. finally i have some one can help me out with my work. it did indeed  solved the main problem but it is repeating one section at the end of the list, and the tagging order of the sections is not accordingly with the main shape. i do not understand why. 

thanks a lot Kim

Attachments:
Permalink Reply by Hyungsoo Kim on August 18, 2016 at 11:12pm

Check this.

Attachments:
Permalink Reply by Zadig on August 20, 2016 at 3:06am

do you know why this happens?

thanks again kim. 

Permalink Reply by Hyungsoo Kim on August 20, 2016 at 3:21am

If you divide a curve 10 divisions with "Divide Curve" component, then the output point count =10+1=11.

So, your section curves are 10, and they don't match up.

If you want to match these two list, you should cull one of last items.

Permalink Reply by Zadig on August 20, 2016 at 3:27am

i got it :)

RSS

About

Scott Davidson created this Ning Network.

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service