Retrieve what is not culled in separate list ?

Replies to This Discussion

Permalink Reply by Luis Fraguada on October 28, 2010 at 2:02pm

Which cull component are you using? If its cull pattern, that is easy enough with a dispatch. Which culling strategy are you using?

Permalink Reply by Arthur Mamou-Mani on October 28, 2010 at 2:06pm

Hi Luis,

Thanks for your reply !

I am using a cull Nth to cull a list of Meshes, pluging a frequency slider to galapagos.

Not sure how I could dispatch in a similar way ?

We are using cull for this definition:

http://www.grasshopper3d.com/forum/topics/curve-network-cells

cheers

Permalink Reply by Arthur Mamou-Mani on October 28, 2010 at 2:24pm

This seems to work but it's a bit complicated...
It's a shame there not another output like B for dispatch in the Cull...

Permalink Reply by Luis Fraguada on October 28, 2010 at 3:00pm

Which Nth are you culling?

Permalink Reply by Arthur Mamou-Mani on October 28, 2010 at 3:02pm

This is what we would like galapagos to figure out as it would look for a certain percentage of opening.
In this case the slider would cull every 19th but this would vary...

Permalink Reply by Ognek Kciroks on October 29, 2010 at 1:18pm

can cull be tweeked to have 2 output parameters -- the culled items and non-culled items?
this seems quite reasonable?

Permalink Reply by MkMrA2 on November 12, 2012 at 11:19am

>>can cull be tweeked to have 2 output parameters -- the culled items and non-culled items? this seems quite reasonable?

Yeah this would be very useful. I'm kind of amazed it isn't there already. 

Mark

Permalink Reply by Michael Pryor on November 12, 2012 at 11:33am

invert the cull in the options, or use sift list.

Permalink Reply by MkMrA2 on November 12, 2012 at 11:54am

Thanks for your reply. Could you please elaborate? I'm afraid I don't know how to "invert the cull in the options". 

For example, say I have a curve with 15 points. I want to operate only on points 5-10. That is I'd like to cull 0-4 and 11-14. I'd love to find the simplest way to accomplish that. 

Thanks, 

Mark

Permalink Reply by Michael Pryor on November 12, 2012 at 12:04pm

right click on pattern option. Select invert.

Permalink Reply by MkMrA2 on November 12, 2012 at 12:13pm

Aha! I was using Cull Index. You are talking about Cull Pattern. 

That will work nicely, thanks :)

Mark

Permalink Reply by Vicente Soler on November 12, 2012 at 3:58pm

The (almost) invert of the "cull index" component would be the "list item" component.

• ‹ Previous
• 1
• 2
• Next ›
• Page