Radius change by attractor field point

Hi,

I've this solid with voronoi 3D.

I created a structure like ask image using WbLaplace
(from here: http://www.grasshopper3d.com/profiles/blogs/marching-cubes-curve-wr...)

Now I would need that the thickness of my rod is reduced at a specific point within the box.
Example: I make a point inside the box and all rod close at that point decrease their thickness.

Someone would know help you do something like this?
Thank You

This is the image

Replies to This Discussion

Permalink Reply by Luca Borro on February 23, 2015 at 3:34am

Gooodd Idea! THanks

Permalink Reply by Luca Borro on February 25, 2015 at 3:04pm

Is it possible to assign to "Rs" and "Re" a value in mm? Example: i want that the radius of edges is 2mm and so I set 2mm! Is it possible?

Permalink Reply by peter fotiadis on February 26, 2015 at 12:06am

all components work in model units ... thus if you use mm > mm is what you'll get

Permalink Reply by Luca Borro on February 26, 2015 at 1:09am

Radius set in "Thickness" (0.37) does not match with Diameter of edge of which should be 0.74mm but is only 0.54mm! Why?

Permalink Reply by Luca Borro on February 26, 2015 at 1:20am

Maybe because I measured at the center of the edge and not at the start point or end point?

Permalink Reply by peter fotiadis on February 26, 2015 at 1:37am

My dear Watson : we are not making Rolexes here, we are "outlining/approximating" a value for a "tube" that is "fuzed" with a million others: it's an indicative start for that fascinating trip to WOW things.

Permalink Reply by Luca Borro on February 26, 2015 at 1:21pm

Sorry for my continous request! No problem. Thanks for your support!

Permalink Reply by Luca Borro on February 24, 2015 at 10:13am

Sorry, another question:

If I insert a fixed value for the "Radius" can I tell to Grasshopper to fill the volume of MESH until they reach a certain volume that I've previousely imposted?

Example: I set radius on fixed value "3".
Now I define a volume that I want ONLY for all esges inside the Mesh, example 2500 mm^3 (ONLY EDGES VOLUME, not general volume).
I want tell to grasshopper to increment cells untile they reach 2500 mm^3 of volume of edges!

Is it possible?
Thanks
Luca