Radiance image mapping

Replies to This Discussion

Permalink Reply by Grasshope on June 20, 2017 at 11:26pm

Hi Ibby,

Maybe you can find some reference from Axel Jacob's "Radiance Cookbook":

http://www.jaloxa.eu/resources/radiance/documentation/docs/radiance...

- Ji

Permalink Reply by Ibby on June 21, 2017 at 12:54am

Hi Grasshope,

I was hoping to setup the daylight with Honeybee radiance.  The radiance cookbook does not use the honeybee interface.  I am hoping someone on the forum can help with an example script.

Thanks,

Permalink Reply by Mostapha Sadeghipour Roudsari on June 21, 2017 at 7:40am

There is no easy way. I wrote a custom script for this purpose which I don't have access to it anymore. The link that Grasshope has shared is in the right direction. You will need and obj exporter. You also have to use Human to set the initial mapping inside Rhino/Grasshopper. I have so much on my plate right now and can't commit to add new features right now but if someone else has time to implement it I can share how I think it should be done / I have done it before.

Permalink Reply by Ibby on June 21, 2017 at 8:17am

Hi Mostapha,

Thanks for all your help. The whole LB/HB community understands how busy you must be trying to develop this and support the users at the same time.  If I knew python I would surely have helped you.  Maybe I should learn python and make myself useful here.

Can you share the paper you had published on this subject?  I may try to take a crack at it.

Thanks,

Permalink Reply by Mostapha Sadeghipour Roudsari on June 21, 2017 at 8:21am

Thank you for the nice comments. Since we're currently rewriting honeybee I have to minimize the time that I spent on the legacy version right now. You can find the paper here.

Permalink Reply by Ibby on June 21, 2017 at 8:58am

Thank you