rabbit orientation growth

Replies to This Discussion

Permalink Reply by RWNB on March 4, 2013 at 10:04am

hi yasser,

i wanted to know if you could solve your problem,

or maybe can help me?

as you can see in the picture shown below,

the l-system component output is unfortunately "NULL".

any advice?

thanks

Permalink Reply by I-G on March 4, 2013 at 10:22am

Rabbit for grasshopper_wip_20120122 (0.80066) no for 0.90014

Permalink Reply by I-G on March 4, 2013 at 1:16pm

rabbit license has expired 

Permalink Reply by RWNB on March 4, 2013 at 2:11pm

thanks, that was the problem!

Permalink Reply by I-G on March 4, 2013 at 3:54pm

Thank RWNB

I do not understand what is happening, but I'm using the latest rabbit 0.3. an example as you velvet expired

Permalink Reply by RWNB on March 5, 2013 at 2:02am

Maybe you should load the version Rabbit 0.3.1.

http://morphocode.com/rabbit/

Permalink Reply by Fariz Badi Uzzaman on March 30, 2014 at 7:34am

hi RWNB, can you tell me what is the name of component in the red frame below?

i have tried to make various thickness Lsystem with pipe, but not as good as yours

Thanks before

Permalink Reply by RWNB on April 3, 2014 at 2:10am

http://www.grasshopper3d.com/profiles/blogs/introducing-exoskeleton...

Permalink Reply by Fariz Badi Uzzaman on April 3, 2014 at 8:51pm

thanks