Problem with triangular faces !!

Replies to This Discussion

Permalink Reply by Nenov Ivo on October 17, 2014 at 6:07pm

If you want triangular faces you can transform your brep into a mesh or use the mesh faces thing and after if you want more divisions you use Weaverbird or Kangaroo !

Permalink Reply by ng5 Alex on October 17, 2014 at 6:17pm

this happens because the lunchbox components work with untrimmed surfaces. yours must be trimmed. so Nenov has a good suggestion. otherwise you will have to spit or trim the curve of the untrimmed version with the perimeter of the trimmed.

cheers

alex

Permalink Reply by Andre Procopio on October 20, 2014 at 6:56am

Thanks Alex for your help ! But i´m really starting to work in GH and I tried this weekend and i could not do the trim or even split ! 

ps: the triangular face it´s already a mesh. 

tks

andré 

Permalink Reply by ng5 Alex on October 20, 2014 at 6:58am

Hello Andre

please upload your files to take a look at.

cheers

alex

Permalink Reply by Andre Procopio on October 20, 2014 at 7:02am

Tks Alex !

Here are the file. 

cheers

Attachments:

• ABN-TRIANG-FACE.3dm, 96 KB
• ABN-TRIANG-FACE.gh, 8 KB

Permalink Reply by ng5 Alex on October 20, 2014 at 7:38am

Hello

here is a possible workflow

check the following thread which might be similar.

http://www.grasshopper3d.com/forum/topics/continuous-aligned-panels...

cheers

alex

ps in the list item component the i input is 1

Permalink Reply by Andre Procopio on October 20, 2014 at 7:48am

Perfect ! Thaks for the big help Alex.

Cheers

Andre