problem simControls honeybee May Update

Hi guys!

I have a problem running Honeybee.

After running Ladybug_UpdateThisFile, HoneyBee_Simulation Controls component updated to May 02 2015 version and stopped working.

The component is red and gives me this error: "1. Solution exception:global name 'maxWarmupDays_' is not defined"

If I go back to the previous version, it does not work (I mean, it does not change the controls in the final idf file).

thank you very much

Letizia

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Abraham Yezioro on May 21, 2015 at 8:22am

Letizia,

You have to reinsert this specific component. Most of the times the update component is enough, but sometimes some component add input/output items, which are not updated in the already inserted ones.

-A.

Permalink Reply by Letizia Martinelli on May 21, 2015 at 8:29am

thank you Abraham!

if I only reinsert the component (I mean, I delete it and insert it again), I get the old component (updated at feb 03 2015), which doesn't work either. Do I have to restart or anything?

Permalink Reply by Abraham Yezioro on May 21, 2015 at 8:31am

Forgot to say. You need to update all components and not just the specific file.

-A.

Permalink Reply by Letizia Martinelli on May 21, 2015 at 8:37am

you mean, there is a new updated version of May, 2nd? Do I have to manually install it?

But on the Update component, I run updateAllUObjects, is it not sufficient?

Permalink Reply by Abraham Yezioro on May 21, 2015 at 8:40am

There are some components that came out after may 2.

You can use the UpdateComponent to do the job. Instead of updating "This file" connect the boolean to the AllComponents input.

-A.

Permalink Reply by Letizia Martinelli on May 21, 2015 at 8:42am

I have already done that, but there still is an error in the new version: "1. Solution exception:global name 'maxWarmupDays_' is not defined"

Permalink Reply by Letizia Martinelli on May 21, 2015 at 8:45am

this is what I got:

Permalink Reply by Abraham Yezioro on May 21, 2015 at 9:08am

The updated component, when you reinsert it, should have 7 input items (instead of 5 of the previous version). So if you did the HB__updateAllUObjects well you should be doing fine.

In case of need upload the file and i'll check it.

-A.

Permalink Reply by Letizia Martinelli on May 21, 2015 at 9:36am

it doesn't.... I solved connecting a panel anyways

Attachments:

2105_simcontrolProblem.gh, 71 KB

Permalink Reply by Abraham Yezioro on May 21, 2015 at 11:52am

Attached a file with the updated component.

-A.

Attachments:

AY_2105_simcontrolProblem.gh, 78 KB

Permalink Reply by Letizia Martinelli on May 22, 2015 at 3:37am

thank you very much :)

Permalink Reply by Chris Mackey on May 26, 2015 at 2:28pm

Thanks for working through this issue, Abraham. Your devotion as a supporter is unmatched. Hopefully, I will get some time to make a tutorial video about syncing the github soon. The process seems to confuse people the first time that they do it and there also appears to be many people who are willing to constantly sync these days.

-Chris

RSS