points inside a projected curve

Hello,

Im working on a loft generated by many curves.

I've been trying many things to select the points on the surface on the inside of a projected geometry (circle shown). I havent been able to sort it out yet.

Suggestions ?

Replies to This Discussion

Permalink Reply by Dedackelzucht on December 1, 2011 at 2:41am

How about this?

Best Regards

DeDackel

Attachments:

111201_Pts inside projectedCrv_DeDackel.gh, 6 KB

Permalink Reply by Dedackelzucht on December 1, 2011 at 3:26am

ups! as it seems you solved the problem. :-)

here is my suggestion.

Dedackel

Attachments:

111201_Pts inside projectedCrv_DeDackel2.gh, 9 KB

Permalink Reply by javier duran on December 1, 2011 at 4:07am

Do you know if there is a way to project a point into a surface ? ive tried to project it using the project command but since my loft is not a plane and my point is not a curve i cannot use any of the projection options.

Permalink Reply by Dedackelzucht on December 1, 2011 at 4:25am

you can do this with intersection mathematical or physical

Attachments:

111201_Pts inside projectedCrv_DeDackel3.gh, 5 KB

Permalink Reply by javier duran on December 1, 2011 at 4:33am

thank you very much ... i have correct now.

Now the thing gets a bit tricky since im trying to fetch the points inside the circle depending on its radius from the center point. That is why i projected the point on the center of the circle to the loft above. Now im figuring out the distance between this point and the rest of them. But now i dont know how to collect the points depending on the distance.

Permalink Reply by Dedackelzucht on December 1, 2011 at 4:48am

sort the distances and use the item component to select them in the right order

DeDackel

Attachments: