path mapper

Hello, I wanted to switch them number of paths and indices of each path branch by using path mapper.

I have a series of points which have 10 path and each path is composed by 5 points.

When i connect path mapper directly from point param, path mapper parameter turned to red color which has an error.

I do not understand why.

Does anyone know how to switch path and number of indices?

Thanks

Attachments:

reference1.jpg, 513 KB

Replies to This Discussion

Permalink Reply by to] on February 19, 2010 at 12:20pm

use pathmapper again just in your case because you have {1;0;0} and {1;0;0;0} you can use on the left side just {A}

Permalink Reply by Seung chul,Song on February 19, 2010 at 1:06pm

Matt

I did not get it.

Can you show more detail?

So, what you suggest is put {A}(I) on the source section?

What about the target section?

Permalink Reply by to] on February 19, 2010 at 1:17pm

source side for the case with {1;0;0} is {A;B;C} and the target side is just {A}
you don't need the bracket with the element count because you are not changing anything on them for the case with {1;0;0;0} just adapt accordingly

Permalink Reply by Seung chul,Song on February 19, 2010 at 1:42pm

Thanks. I undertood.

I am sorry again. You suggested another way to use mesh triangle by flatting my points. but it requires index for each points.

I guess it might be better for us to see my file. i will attach it.

Attachments:

Working01.ghx, 230 KB

Permalink Reply by to] on February 19, 2010 at 3:10pm

hi seung
attached the file with series

Attachments:

Working_02.ghx, 684 KB

Permalink Reply by Seung chul,Song on February 19, 2010 at 3:44pm

hi Matt

thank you so much, BTW, how can i open this file?

When i click the file which is attached, it is just code.

Do you know how to save it to GHX or any readible format ON GH?

Thank you so much.

I appreciate^^

Permalink Reply by to] on February 19, 2010 at 4:12pm

hi
right click on the file and delete the .xml and save the file .....btw i am not matt

Permalink Reply by MARIO VERGARA on February 19, 2010 at 12:51pm

OK.
So after playing around with the path mapper
I can't seem to select the rest of the x/y point rows individually
I tried different combinations with no luck, it keeps on selecting the same rows.

Permalink Reply by to] on February 19, 2010 at 12:58pm

mario so if you look on the pathmapper there you see {0;1}(11) so the logic is {A;B}(i)
so if you now use {A}(i) that make no sense because A is @ all paths zero so you get back one path because zero is one path with 11 elements
so you have to take B because it has a number series from 0 to 3 because you have 4 curves
than everything works ;)

Permalink Reply by MARIO VERGARA on February 19, 2010 at 7:17pm

Thank you guys!
this is really helpfull