Path mapper and more sophisticated manner?

Replies to This Discussion

Permalink Reply by Andrew Heumann on February 1, 2011 at 12:46am

Hi -

Here is one approach that solves the questions you've highlighted. The first issue, with a variable path transformation, was solved with the "replace branches" component; the second with the "flip matrix" component, and the surfaces were added, not with a 4pt surface, but by lofting your horizontal sections with the loft options set to "straight."

Hope this helps! Let me know if you have any questions.

Attachments:

• Better_path_management.ghx, 457 KB

Permalink Reply by Atsuo Nakajima on February 1, 2011 at 1:31am

Hi Andrew,

 

Thank you for your perfect solution.

I am not good at data tree handling and I was struggling almost a day. your advice is what I need.

Also I found your blog is helpful, I will read in detail later.

 

Thanks again!

Permalink Reply by Firat Aydin on December 20, 2011 at 8:45am

is there any way to put variable inputs to pathmapper. thnx

Permalink Reply by Danny Boyes on December 20, 2011 at 9:08am

No. you would have to generate a path structure with normal gh components and then use the Replace Branches component.

Here's an example that re-groups the points from an SDivide to a different configuration

Attachments:

• GroupingPathsExample.gh, 5 KB