origami to surface

Replies to This Discussion

Permalink Reply by dvdrbls on January 25, 2011 at 3:10pm

Hi Gonzalo, cant help you but one question, what software are you using to do that?

Permalink Reply by taz on January 25, 2011 at 4:41pm

Daniel Piker produced a version of the waterbomb:

 

http://www.grasshopper3d.com/forum/topics/rigid-origami

Permalink Reply by gonzalo on January 26, 2011 at 1:55am

Thanks for the answers.

 

I solved the problem, the origami definition was right, but the staggered surface wasn't, so I corrected it and now it works fine. Maybe it can be improved, but at least it works! :)

 

cheers

Attachments:

• origami to surface.jpg, 653 KB
• origami to surface2.3dm, 57 KB

Permalink Reply by gonzalo on January 26, 2011 at 2:21am

Here the GH definition

Attachments:

• origami to surface2.ghx, 1.3 MB

Permalink Reply by Jiri Palacky on November 9, 2011 at 7:57am

Hi gonzalo, the result looks like this:

where do you think is the problem? I just opened your definition. Thank you for your help. Jiri

Permalink Reply by Jiri Palacky on July 21, 2011 at 2:54pm

Hi, this is an interesting topic for sure.

I am working on GH origami (paperfolds) as well, and started discussions here:

 

http://www.grasshopper3d.com/forum/topics/paperfold-models-in

and here:

http://www.grasshopper3d.com/forum/topics/paper-stripe-bending-need

 

Thank you for sharing your solution. I'll check it out.

Jiri

Permalink Reply by Jiri Palacky on July 23, 2011 at 2:51pm

Running two OSs on my Mac takes some of the fluidity of your sphere intersection virtuosity (each recalculation takes the 2 cores about 2 minutes). Man, how long did this take you to solve and what exactly is happening there?