Offset in a different plane of the original curve

Replies to This Discussion

Permalink Reply by Pep Tornabell on March 25, 2010 at 12:36pm

You can define any plane for offseting. Just input the plane you want in the P (plane) input of the Offset component.

salut!

Permalink Reply by Igo Kommers Wender on March 25, 2010 at 12:54pm

I have tried this. I am afraid I am doing something wrong because I can see the plane I set in the P (plane) input with a different coordinate form the source curve, however the offset is still in the same plane of the source curve.
Thank you in advance,
Igo
Offset in a diffrent plane.ghx

Permalink Reply by Igo Kommers Wender on April 4, 2010 at 5:40pm

I haven't discovered yet how to do an offset of a curve in a different plane. If someone can help me with a definition it would be great. I have attached a file with an example of I'm trying to get.
Thank you very much.
Igo

Attachments:

• Offsetinadiffrentplane.ghx, 46 KB

Permalink Reply by Juan_P on April 6, 2010 at 3:51pm

hey,
well why dont you "move" the offset curve on the "Z" direction and set the distance with a slider at "7"??

I have attached the file.. let me know if this is what you intended..

Juan_P

Attachments:

• Offsetinadiffrentplane[autosave].gh, 11 KB

Permalink Reply by Igo Kommers Wender on April 6, 2010 at 8:59pm

Hey, thanks for your reply. This sounds perfect!! I should confess I am still very intrigued why I can not use the plane entry in the offset component to do that. Maybe there was something I was not doing well since I have understood this is way to get the offset in another plane, or maybe the plane entry is for another purposes i still don't know.
Anyway your solution works great for what I intend.
Thanks again for your reply,
Igo