Numeric display cross section forces

Hi there,

In my model I would like to display the numeric cross section forces for My and/or Mx, in the BeamView component. But the values are all displayed as 0.00 (in kNm I suppose?). This is probably because the values are too small as it is a small scale model with individual segments up to 70 mm. The deformation and the filled planes for these cross section forces are displayed correctly (See attachment).

Is there a way to get these numeric values otherwise?

Best,

Andreas

Attachments:

Bending Moment Test.png, 155 KB

Replies to This Discussion

Permalink Reply by Karamba3D on May 24, 2018 at 1:16pm

Hi Andreas,

you can set the number format and the number of digits of the cross section forces display in the 'karamba.ini'-file. Change the entry left to 'crosec_force_number_fmt'.

The 'karamba.ini'-file can be found in the Karamba3d installation folder ('...Rhinoceros 5.0 (64-bit)\Plug-ins\Karamba'). You get there e.g. by double-clicking on the Karamba3d desktop icon.

Best,

Clemens

Permalink Reply by Andreas Holterman on May 25, 2018 at 6:58am