night time

hi there,

im having a problem with the draw sunpath comp - it says that theres nighttime - allthough i know that there is still sun to be seen (also shows at google earth)

if i try 9 pm i get the error "nighttime"

how could that be - must be in the weather file i assume - is there anyway to fix this ?

suncalc.net gives me the following

00:00—02:17 — night

02:17—03:43 — astronomical twilight
03:43—04:39 — nautical twilight
04:39—05:19 — civil twilight
05:19—05:23 — sunrise
05:23—21:11 — daylight
21:11—21:15 — sunset
21:15—21:55 — civil twilight
21:55—22:51 — nautical twilight
22:51—00:17 — astronomical twilight
00:17—00:00 — night

plz help - thank you !!!

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by pyrit on September 13, 2015 at 8:20am

i assume this has to do with the daylight saving - any workaround ?

thanks !

Permalink Reply by Mostapha Sadeghipour Roudsari on September 13, 2015 at 3:05pm

Hi Pyrit, Have you seen Paul's solution here. Also night time in Ladybug means after sunset.

Permalink Reply by pyrit on September 16, 2015 at 12:08pm

hey mostapha,

im not sure what you mean by nighttime... i would like to investigate all the rays that are able to hit one surface. so for me its important to have an analysis that matches results to the right hours ... which doesnt work with pauls solution because it alters all vectors i assume

Permalink Reply by Mostapha Sadeghipour Roudsari on September 22, 2015 at 5:06pm

Hi Pyrit,

Daylight saving won't change the results of sunlight hours for a day unless you're looking for specific hours of the day. In other words, daylight saving is an agreement to change the clocks for an hour. The sun will show up in the exact same positions as it is supposed to. If you like to get a more accurate result then you can set-up the timestep to a high number.

Mostapha

Permalink Reply by Anton Szilasi on September 13, 2015 at 1:29pm