Natural ventilation of an open structure

Hello everybody, I am quite new to energyplus and I decided to try it with for a study I am doing for a pedestrian bridge.

I prepared the results and in first pace they made sense to me but looking at the air flows per area I realised there is something wrong, It look like energy plus has trouble with air wall as external wall as showed in the picture.

I am not too sure how to set natural ventilation as the windows in this example are closed and the air is coming only from the "holes" where the stairs are.

Does anybody has any idea? I attach the file for reference.

Thanks

Amedeo

Attachments:

elevetated pedestrian passage.gh, 800 KB
Picture13.png, 270 KB

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by amedeo scofone on July 26, 2016 at 3:29am

Hello everybody

Maybe I can make I can make an easier question, how can I open few windows in different zones and not all of them to test natural ventilation?

Thanks

Permalink Reply by Chris Mackey on August 2, 2016 at 9:08pm

Amedeo,

I apologize that you are getting such a late response. Your observation that air walls are only intended for interior walls is correct. Auto-calculating the airflow rates that you would get with exterior air walls is far too complex a task that is potentially fraught with dangerous assumptions. However, if you have a sense of how that air will flow across the air wall and there will not be much inter-zone buoyancy driven flow, you can model the airflow with the custom ventilation option in the "Set EP Airflow" component that you see in this example:

http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&for...

Assuming that there will be no wind-driven cross ventilation and that all ventilation is single-sided buoyancy-driven flow, you should set the wind discharge coefficient to 0 and the stack discharge coefficient to "0.25 - For bouyancy with ONE window with NO insect screen."

The height input is the height of the opening and the effective area is the area of the opening. Since some of you openings are triangular, you may want to decrease the height slightly from the total height to better account for the fact that you do not have equal areas on top and bottom of the opening.

-Chris

Permalink Reply by amedeo scofone on August 4, 2016 at 2:59am

Thanks Chris,

Really appreciated!

Amedeo

RSS