move + rotate curves

Hello,

I can't understand where is the problem:

I would like to move 3 curves using series + vector + move component, the problem is that if I have only one curve it works, but not if I have more than one crv.

As you can imagine it is not a big problem if you are working with 3 crvs, but when you more than 10 it's start to be a mess.

In the image you can see that only the green one is working.

Thanks for helping me.

paul.

Attachments:

Screenshot_2010-06-11_14-21-13.jpg, 233 KB

Replies to This Discussion

Permalink Reply by WT4 on June 11, 2010 at 9:53am

I presume you want to offset all three curves (or more) by the same amount. Try right clicking in the middle of the move component and change from the longest to cross reference.

Regards

Permalink Reply by paul piciorul on June 11, 2010 at 11:11am

touche'!
now it's time for the second part of the problem:
I managed to move 6 elements (with cross reference) now I would like to rotate those elements, but something strange is happening: the two elements (are three couples of elements) aren't moving with the same angle; why?
the image helps.
thanks.

Attachments: