Loft simple curves (lines) to generate surfaces

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on February 2, 2017 at 10:17am

Hi.

The biggest mistake is that if you provide all the curves into the loft, then all 14 curves would be lofted continuously. Check attached.(Red group)

Attachments:

• Loft_simple_curves_re.gh, 15 KB

Permalink Reply by Kenyon Graham on February 2, 2017 at 12:05pm

Awesome took me a little time to determine what to do with the loft to get at the surfaces...open up the loft with a flatten.

Thanks

Kenyon